Testing & Training Bundle 104

Introducing the MXEdge Lift – Lattice Training’s BRAND-NEW lifting block, featuring our most ergonomic edge, designed to maximise your finger strength training.

A lifting edge is quickly becoming the essential training tool in every climbers’ pack. Whether you’re warming up at the crag, or training finger strength at the gym, a lifting edge (a.k.a. lifting block, portable hangboard, no hang device, block pull) is an increasingly popular alternative to traditional hangboarding.

PULL HARDER ON OUR ONE-OF-A-KIND EDGE: We’ve spent hundreds of hours researching ergonomics, usability and peak force production to develop a unique edge geometry that is not only comfier, but lets you pull harder!

7 DIFFERENT GRIPS: the MXEdge Lift includes 3 edges, 3 pinches AND a cheeky mono so that – no matter the climb – the MXEdge can be specific to your training.

SIZE DOES MATTER: The MXEdge Lift comes in 2 SIZES, small and large! Choose a board that matches your ability, preferences, goals, and – most importantly – hand size!

Want to buy both sizes? Get 15% off with the MXEdge Lift Duo.

MXLARGE | edge: MX22, MX16, MX12 | pinch: 100mm, 57mm, 16mm | mono: 28mm

MXSMALL | edge: MX18, MX14, MX8 | pinch: 100mm, 57mm, 16mm | mono: 25mm

The Quad Block is the latest in grip strength training, a portable pinch block for training and warming-up, designed for use at the gym or at home. It features 5 grip positions that have been designed and developed with industry leading coaches, physiotherapists, grip strength athletes, & sports scientists.

The Heavy Roller is a wrist training device that uses an offset loading mechanism. To maintain your grip during a lift you must squeeze the device and flex or extend the wrist against the direction of spin. The high torque generated at relatively low loads targets either your wrist extensor or flexor muscles to improve grip strength without loading the shoulders. An ideal training tool for climbers looking to maximise their grip strength gains.

The Lattice Lifting Pin is the perfect companion to our Quad Block or any other grip strength "lifting" device and also replaces that annoying sling + weights set up many of us have used in the past!

The product has been designed for climbers, by Lattice and features a climbing carabiner-friendly mounting hole. Usefully, it also sports a Lattice branded cork base for protecting your floors and dampening noise for those late-night lifting sessions.

Unlock more precise testing and break plateaus with a set of Lattice Fractional weight plates. By using smaller weight increments you can progressively increase load every session, particularly useful when working at lower weights when training with our lifting devices.

Climbing flexibility is a key factor in athlete performance on resin and on rock, check out our blog if you're not convinced! We’ve seen first hand that task based stretching is often more effective at increasing climbing flexibility. That’s why we’ve developed the Flex Mat: a one of a kind cork yoga mat specifically designed for climbers to assess your flexibility, target your training, and track your mobility.

For a limited time only - Get 20% off our cork yoga flex mat and Flexibility Deep Dive course with our Flexibility Course Bundle

Stretching for climbing can improve performance on resin and rock, check out our blog if you’re not convinced! We’ve found task based stretching often increases the effectiveness of climbing stretches. That’s why we’ve created the Flex Block: a one of a kind cork yoga block specifically designed for climbers to assess your flexibility, target your training, and track your mobility.

A Remote Climbing Assessment, chosen and adapted to your individual level. You do the testing then we will analyse your results using our specially developed statistical models so that you can pinpoint the areas of strength and weakness in your climbing.

Gift option available, the perfect present!